Jump to content
Sign in to follow this  
b34st

Spigot rings

Recommended Posts

Help!!! 

 

Right apparently I need spigot rings but I don't know what size I know the mini end which is 56.1 mm  but I'm struggling with my wheel size 

 

I've enclosed a pic 

 

 

Sorry for being thick 

 

 

Screenshot_20180913-192657_Instagram.jpg

Share this post


Link to post
Share on other sites

Measure the inside diameter for the wheel measurement. Or if you know the make of the wheel check on the internet search engines. You’ll get the measurements that way too 👍🏻

Share this post


Link to post
Share on other sites

I'm not 100 percent sure on the make of the wheel 

 

Can you tell the measurement from my pic ? 

 

I've already bought one set and they were wrong don't want to get wrong again lol 

 

Share this post


Link to post
Share on other sites

The wheel not stamped on the inside with make/name? 

 

Can’t tell the measurement, you need to measure across the centre of the bore

Share this post


Link to post
Share on other sites
19 hours ago, b34st said:

 

.....Sorry for being thick ...

 

 

 

 

If i catch you saying that phrase again ! lol

 

Your not thick, its a damn good question that someone else might need to know the info from down the line. 

 

#justsaying :)

Share this post


Link to post
Share on other sites
1 hour ago, Mr Watton said:

 

If i catch you saying that phrase again ! lol

 

Your not thick, its a damn good question that someone else might need to know the info from down the line. 

 

#justsaying :)

 

Totally agree, there is never ‘ a silly question’ or ‘sorry for being thick’ statement needed-nothing is ever a silly question, because if you don’t know then you don’t know 😉

Share this post


Link to post
Share on other sites
On 13/09/2018 at 23:08, Bornared said:

The wheel not stamped on the inside with make/name? 

 

Can’t tell the measurement, you need to measure across the centre of the bore

After several hours research I believe they are made by a company called  EMR racing 

Share this post


Link to post
Share on other sites

A tape measure will not be accurate enough for you on this sort of measurement. I would use a vernier gauge to get it accurate.

 

What size did you buy previous ?

were they too big or too small for the wheel ?

 

oh yeh and never claim to be thick, everyone has their area of expertise..........

 

......we are still trying to work out what mine is 😂

Share this post


Link to post
Share on other sites

they were too big before I have done some research and got a different size this time but still not convinced they will be right 

Share this post


Link to post
Share on other sites

Give the wheel a good clean, get rid of all the crap, I would imagine they would be firm to push in but would not need a big hammer or press. On the other hand, they don’t want to fall out when you turn the wheel over 

Share this post


Link to post
Share on other sites

Ive tried looking about and if they are EWR then these are pretty damn rare, its hard to find any info on the 4 hole version!

 

Some of the bore sizes look massive to me, but like Ian says the vernier gauge will do the job especially as you already know the MINI Bore of 56.1mm

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Sign in to follow this  

×
×
  • Create New...

Important Information

Guidelines